SiyahKernel S3-v1.0

• added (again) Entropy512′s multicast filter patch to wifi driver
• possible sound crackling fix. (please test and report)
• added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface
• some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.
• enabled autorooting again (supersu 0.94)
• increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.
• added 700 and 600MHz steps for touchboost setting in STweaks
• update beta1 -> beta2: fixed fm speaker problem with dac_direct. disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers.
• update beta2 -> beta3: adbd in lpm mode (charging while the device is off). when the device is charging in off state, limited the number of cores to 1, frequency to 200-800. speaker amplification setting in STweaks.
• update beta3 -> beta4: enabled swap. enabled zram. patched mm and android files to include android specific zram optimizations (from note kernel). updated pegasusq to the latest version which has min_cpu lock. added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz step. enabled ZRAM as default with 150MB swap. fixed mali currentlevel after resume. enabled speaker_tuning. some autobrightness related changes (please comment on if this one or the original is better)
• beta4 -> beta5: fixed eq reset problem with samsung stock player. some gpu related tweaks. removed speaker tuning from STweaks but it is still available for those who want to enable it (look in /sys/class/misc/scoobydoo_sound)
• beta5 -> beta6: fixed speaker amplification and notification sound clamping (was only broken in beta5). added 5th GPU step. removed resume freq completely and added gpu freq boost on touch (0-disabled, 1-jump to step2 on touch 2-jump to step3 on touch). fixed MTP problem in OSX. Testing: Eq presets for speaker (re-enabled equalizer for speakers). led brightness limit removed (cherry-picked from cm10 kernel). reverted high brightness settings (if you want higher brightness increase max gamma to a higher level)
• beta6 -> rc1: insecure adbd. disabled eq for speakers. re-enabled speaker tuning . removed speaker amplification and tuning level (too many people complaining about distortion after setting it to max which is not a kernel problem. so, you will have to set it manually). lots of refactorings in sound part. set swappiness to 90 (only effective if you enable zram or swap).
• rc1 -> release: Linux 3.0.15. CGROUP_TIMER_SLACK. some delay before applying STweaks settings on boot to fix gpu settings not being applied. speaker amplification is added back to stweaks but not as 0-63 but as 0-6, 0 will be the the same as stock. Touch gestures by Tungstwenty.

İndir: http://d-h.st/users/siyah/s3